Browsing Category:

DIY

In DIY, Holidays, Home Decor on
October 23, 2017

Spiderweb Table Runner

 

Everrrrrry time I walk past the dollar bins at Michaels to check out, I see paper rolls of all colors and patterns. Usually I have pretty good self-control with these impulse buy type of products but somehow I have acquired hoarded five of these over the years, none of which have been used…until now!

With every holiday, our dining table gets a little festive makeover. For Halloween this year, I made a table runner out of those dang paper rolls and was quite pleased how it turned out! The paper material is thin so I quickly learned a lesson in patience when peeling the paper off the 12in x 24in cutting mat. I used the spiderweb stencil from Design ID#45894, stretched it out to fit my extra-long cutting mat, modified the design a bit to make it into a 12in x 24in piece (a lot of ungrouping, welding, and deleting border), sent it to Silhouette to cut, and voila!

I know I love Halloween but I can’t help but think what kind of runner I can make for Thanksgiving or Christmas?! After all, I do have paper rolls in kraft and red!ย ๐Ÿ™ˆ

In DIY, Freebies, Holidays on
October 19, 2017

(Kindness + Monster) Rocks (FREEBIE!)

 

Drum roll please…I am SO excited to share with you today a very special collaboration with Word Rocks Project! The gal behind this beautiful, straight-from-the-heart kindness movement is actually my neighbor, Carol! And when I say neighbor, I mean like she’s literally next door! There is a small slope between our homes and we bypass the front yard/sidewalk route and travel between this little “secret” slope to get to each other’s front door! This is where you can find us exchanging craft supplies (no joke!)…pretty sure there’s glitter scattered over the landscaping!

Carol decorates rocks so artistically and poetically with the sweetest and encouraging words. You have to check out her Instagram! For our collaboration, it was so cool to see her colorful rocks come to life as Halloween monsters while I came up with cute flag printables for our fun creatures to hold.

Word Rocks Project is the first rock project ever (started over six years ago!) and has been touching so many hearts and changing lives! It’s an easy concept that young children can even get in the action!

Want to get your kids to join the kindness movement? It’s a great way to teach lifelong values to our next generation that will make the world a better place. Let’sย spread kindness and uplift peopleโ€™s hearts and doing it with a little Halloween flair! Below is the supply list and a super easy tutorial!

Click here to download today’s FREEBIE (Kindness Flags)!

 

 

 

 

In DIY, Holidays, Silhouette on
October 16, 2017

Halloween Hanging Flags using Oly*fun

 

Is it just me or is there something nostalgic about Halloween? Flashbacks of sorting, comparing, and trading Halloween candy, breaking open a bag of stretchy cobwebs, and watching Hocus Pocus on repeat. I’m trying to pace myself with the month-long Halloween celebration and will watch the movie when the 31st gets closer. In the meantime, I will just craft about the movie!ย Amuck! Amuck! Amuck!

Awhile back, I heard from a fellow crafter about this really neat and versatile material called Oly*fun. Calling itself the “everything material,” it can be used indoors or outdoors (water resistant) and it doesn’t tear, fray, or fade.ย What??? I. must. get. my. hands. on. this. material.

And so I did and got cranking on a…Halloween craft (duh!). Because you can never have enough Halloween decor especially with such an easy material to work with! A felt hanging banner was fun to make earlier this summer but lemme just tell you…using Oly*fun truly made crafting fun and QUICK! I pressed the material firmly on the cutting mat and I actually didn’t need any stabilizer, which is a big time-saving step. My Silhouette CAMEO essentially treated it like paper. TIP: I do recommend double cutting to ensure to clean cut. And you guys, it peeled off so effortlessly. It didn’t curl like paper can from a sticky cutting mat. The edges were always cleanly cut. Not one single fray. Simply amazing!

If you get your hands on this miracle material, here are the cut settings that worked for me!

 

I have a whole bunch of colored “sheets” left and am already brainstorming the next project to make with Oly*fun!

In DIY, Freebies, Graphic Design, Holidays on
October 12, 2017

Test Tube Treats (FREEBIE!)

 

Something about test tubes just scream Halloween, doesn’t it?! Totally right up Dr. Jekyll and Mr. Hyde’s alley. My alley too. I’ve been eyeing these test tubes for years (yes YEARS!) but haven’t found a way to use these for my children’s birthday parties, especially since these particular test tubes are made out of glass. But alas, Halloween is a couple weeks away and I’ve waited long enough so I treated myself (ha, pun!) and bought them to give away to my galpals! This is a cute little gift idea for teachers, co-workers, and even neighbors!

I purchased the glass test tubes from Michaels from their dollar bins (although I believe they’re $1.50 each. These were located near the checkout aisle at my local store, FYI). TIP: Buy ones where the labels are new and easily peel off. Otherwise, be ready to wipe down with Goo Gone.

Next, simply fill with tiny Halloween treats (the test tubes are not very wide so the skinnier the candy, the better). I whipped up these fun printable labels that adds a festive finishing touch to your mad lab creation. Today’s FREEBIE even includes a label where you can write in your or your child’s name.

 

 

In DIY, Holidays, Silhouette on
October 9, 2017

DIY Halloween Spiderweb

 

Six years ago, I had a craft blog (not this one) where I shared similar tutorials and projects like I do now. Then kids came into the picture and well…my time was spent on either wiping butts, doing the fourth load of laundry, or finally taking a shower at 8:30pm. Life is a little less hectic these days *knock on wood* so I’m back at it with crafting. One of my most popular post on my old blog was a simple and super economical DIY project showing how to make spiderwebs out of black yarn. It was even featured on Apartment Therapy! For about $3 or less, you can have instant spooky spiderwebs in your windows in no time!

Supplies Needed:

  • Black yarn
  • Scissors
  • Scotch tape

 

 

In DIY, Holidays on
October 5, 2017

Lil Boo Glow-in-the-dark Shirt

Who grew up in the 90s and had glow-in-the-dark stars all over their bedroom ceilings and walls?ย Me me meeeeeee!!! I LOVED (and still do) everything and anything that glows in the dark. I remember putting glow-in-the-dark puffy paint on anything I could, from my Keds to my Jansport backpack. Ahh, the good ol days.

Well, lucky for me, Silhouette makes glow-in-the-dark heat transfer so I can feed my glow-in-the-dark obsession through my children! Did I just say that out loud?

While browsing for Halloween designs, my eyes caught this super cute designย and I knew I had to have it. It’s perfect for a simple DIY heat transfer shirt project for your little ones. Simply purchase a blank solid shirt (I usually get mine from Old Navy and the best part was this orange shirt was on clearance!), mirror image the design, and send to Silhouette to cut. If you want step-by-step instructions, read this blog post and start at Step 5.

The only important tip I have to share is to hold down your heating element longer than normal. Even though this is a smooth material, I actually had to press my iron down a couple times for about 45-50 seconds each time. I think this is because the clear plastic that is adhered to the glow-in-the-dark HTV is thicker in this product versus the standard smooth HTV.

In DIY, Holidays, Silhouette on
September 26, 2017

Playing Around with a New Silhouette Product – Metallic Temporary Tattoo Paper

 

Just a couple months ago, Silhouette released some new, exciting products and I got my crafty hands on a sample set of the metallic temporary tattoo paper! While at the Silhouette Summit, I got to try it firsthand and was quite impressed with how long it lasted on my arm. It took a couple days of good scrubbing before it came off. Since I already tried it as a temporary tattoo, I wanted to try something different with this product for my blog post on the Silhouette America blog. What to make with metallic temporary tattoo paper??

Well, this summer heat has me beyond ready for fall decorations so I came up with a neatway to decorate craft pumpkins. Swing by the Silhouette blog for my tutorial and you can make these spooktacular pumpkins for your own home!

 

In DIY, Home Decor, Silhouette, Weddings on
September 19, 2017

Personalized Ringbearer Sign

 

You guys, it has been a busy couple months for me and with the upcoming holidays and birthdays (yes, all four in my family have Nov-Dec-Jan birthdays), I don’t see an end in sight! But luckily, I can involve crafting in the chaos and that’ll feed my creativity! As for my sanity, what’s that?

Last weekend was my last wedding for 2017! For the couple, I created a unique ringbearer sign that turned out so well that I want to share it with you!

There were two ringbearers so one carried the pillow and the other carried this sign. Acrylic/glass wedding signage are all the rage right now but they can be so expensive and unfortunately is a one-time use item. No bueno! But I wasn’t about to give up, I knew there was another way to do it. So,ย I found a super affordable way (like 1/3 of the price) to make a similar-looking sign that can also function as home decor after the wedding! The frame is a floating frame so the newlyweds can simply peel off the cardstock text, wipe the glass clean, and insert their favorite photo from the wedding. I heart practicality.

This project was so easy to make and is a fabulous way to get creative and clever in coming up with a personalized message. Want to make one? Of course, why wouldn’t you? It even doesn’t have to be for a wedding! Check out the tutorial below!

 

Where to buy specific craft supplies: 12in x 12in floating frame |ย metallic gold brushstroke paper

 

 

In Birthday, DIY, Graphic Design, Parties, Silhouette on
September 13, 2017

For Baby Elaina’s 1st Birthday

This past weekend, we celebrated my dear friend’s daughter’s first birthday! Little baby Elaina came on Labor Day last year (oh the irony!) and has grown into such a little cutie with an adorable smile! To honor and acknowledge her Korean culture (she’s half-Korean, half-Chinese), a Dol celebration was in order! Elaina’s mama got a little DIY herself and made the Dol towers out of white and black beans. One tower says “Happy First Birthday” and the other is Elaina’s name in Korean. How cool is that?

Purple and aqua were the party colors and were sprinkled throughout the event. I love the idea of using just colors as your “party theme” because it makes party planning a cinch! And luckily, these two colors are very popular right now thanks to the mermaid trend.

It was such a joy to help my friend, Anna, with party decorations! She told me the items she needed and gave me total creative license in the design. A designer’s dream!

A traditional component of a Korean first birthday party is the Doljabi, where the child is placed in front of several objects and whichever one he/she selects will predict her future! The guests were asked to cast their vote so I created a little sign to go along with the game.ย And of course, a first birthday party must-have is the one year poster listing all the special favorites and milestones. Again, I used the trick of printing this custom design as a color engineering print and taped it onto a foam board bought from the dollar store. The color quality was great too!

 

 

Michaels had a cardstock value pack in the party colors so it made paper decorations super easy to coordinate! From the “Happy 1st Birthday” pennant banner to the smash cake and cupcake toppers. I added a little gold glitter on some of the cupcake toppers for a little sparkle…it’s a little girl’s birthday party after all! I also learned a new craft that I’ll for sure be making again for another party…tissue paper pom pom toppers! A tutorial for that will be on the blog later this month.

 

The smash cake topper was a tricky project but so glad I put on my MacGuyver thinking cap on and made it work! In order to replicate the style of the topper I made for my own daughter’s smash cake, I needed to find a way to make the sans serif letters on “elaina” and “one” stand on their own versus being connected to the letters before/after. For example, I could easily have the letter “e” of “elaina” touch the letter next to it (“l”) but it would not look right if I connected the letter “i” of “Elaina” to the letter “a” in front of it or the letter “n” after it. Luckily, I was able to “weld” the word “turns” with the word “one” at the bottom of the topper but the word “elaina” was still a challenge. So how did I do it? I glued the letters of “elaina” to a small clear acetate sheet. Then, I added two skinny “pillars” of acetate sheet behind the word “turns” and connected the two acetate sheets. You can kind of see it behind the “s” in “turns”. This created the illusion that the letters on the topper wereย “floating”! #crafthacksFTW

 

Little Elaina was surrounded by so many family members and friends. She might have been a little overwhelmed with all the excitement and overstimulation! But sorry sweet girl, it’s because you are so loved! Happy birthday Elaina!

 

 

By /
In DIY, Silhouette on
September 6, 2017

PixScan – my new favorite tool!

One of the reasons I decided to join the Silhouette Design Team was to push myself to try new projects and techniques. Well…a couple weeks ago, I got the opportunity to play around with Silhouette’s PixScanTM mat, which is a must-have for any paper crafters out there. It is similar to a cutting mat in that you can place paper on it and use it to cut with your Silhouette machine. The coolest part is the incorporation of technology to make precision cuts! You simply upload a photo (taken by smartphone, camera, or scanner), bring the image into Silhouette Studio and it magically appears in your Silhouette Studio design program. From there, you can see where exactly your paper is placed and place your cut designs accordingly. Iย can’t believe I didn’t use this earlier!

To see how I used the PixScanTM mat, check out my blog post at Silhouette’s blog! ๐Ÿ™‚

 

 

 

By /