Browsing Category:

DIY

In Cardmaking, DIY on
August 28, 2017

Same but Different – One Statement Piece, Two Different Cards

 

Two of my closest friends were each celebrating their own special occasions…a 6-month anniversary and a birthday! So that meant it was card-making time!

I came across this adorable cut file by Lori Whitlock (Silhouette Design ID#62270) and this fun design by Megan Hardy Designs (Silhouette Design ID#195787) and knew I wanted to use them both for my friend’s anniversary card. Earlier this year, I  purchased the map patterned paper with no immediate plans for it. I just knew I had to have it. #craftersproblems but don’t you agree that the print is so dang adorable?! My friend and her hubby love to camp, explore, and ride bikes so it was a perfect background paper for their card. Even though the grey and olive green angled cardstock pieces were simple additions, not only did they pull in colors from the map print thus creating a cohesive look but they provided a framework for the remaining pieces. The “Love the Adventure” piece popped nicely against the grey and the bicycle was placed at an angle as if it was riding up an olive green hill. The heart balloons provided some counterbalance as well as color to the card.

Since I just adored the bicycle with heart balloons, I cut out those pieces again with my Silhouette CAMEO to see if I could create a different card…this time for my other friend’s birthday. This time I changed up the orientation and created the card to be upright. This allowed for space above (so I added more balloons) and below the bicycle (I added the sentiment ribbon) . The mint-colored scalloped circle plus two linear strips of pink washi tape reinforced the bicycle as the card’s focal point. Since there was a variety of color in this card already, I opted to embellish the card with a sparkly touch (gold sequin plus two tiny rhinestones on the “Happy Birthday” sentiment).

This was a fun card-making challenge! I learned that subtle differences in layout, layering, or embellishments can really create a different look in the cards even with the same statement piece (in this case, the bicycle with heart balloons). Although I did not intend to make two cards with the same statement piece, I’m so glad I did! Such a good exercise to expand one’s creativity. I wonder how many different cards I could have made with a bicycle and heart balloons?!

 

By /
In DIY, Parties, Silhouette on
August 15, 2017

Personalize Your Special Event with Your Own Print and Cut Design

As I mentioned in an earlier post, June was a busy month for me and it was totally unrelated to this blog or my gig with Silhouette. I was blessed with the opportunity to work on two special events with Switchfoot’s BRO-AM Foundation. Their music was on repeat in my college days so this experience was also sentimental. If you have a few minutes, take a moment to learn more about their awesome non-profit that was founded on the band members’ desire to give back to the San Diego community and youth initiatives. As a mother, I am thankful the less fortunate kids out there are getting love, hope, and support every child unconditionally deserves!

One of our events was a Benefit Party where we placed custom sugar cookies in each VIP gift bag. We wanted to carry through the branding as well as the mission statement wherever possible. So why not on the packaging label that seals each cookie bag?

This method is pretty much making your own Print and Cut design. And the beauty of this method is that the process behind it can be applied to any special event, from birthday parties to weddings.  Let me show you how!

  1. To start, I created my cookie label design in Adobe InDesign. You can use any graphic software program that allows you to save your design in common image file types (JPG, PNG, BMP, GIF, and TIF files). For more info, click here for more details.
  2. For this event, I needed 1.50in diameter cookie labels so in InDesign, I made a wider circular design perimeter (1.55in) so that I knew to keep my design within it.
  3. While designing, I also kept in mind the location of Silhouette’s Registration Marks, which is necessary for Print and Cut function to work. Basically, leave some space on the top as well as the bottom left area.
  4. When the design was complete, I simply exported the file as a PNG and imported it into my Silhouette’s library.
  5. Within the Scale Window, I resized it to fit a letter-size cardstock sheet (8.50in x 11.00in).
  6. Next, I placed 1.50in diameter circles over each cookie label while making sure they were nicely centered. These 1.50in circles’ cut lines fell within the 1.55in design lines.
  7. And finally, I sent it to Silhouette to first print the image with my home color printer and then transferred it onto a cutting mat and sent it again to Silhouette to cut with the cut settings.

That’s it! How easy is that?! Knowing this technique will really personalize your event and make your event styling look and feel cohesive!

 

By /
In DIY, Home Decor, Silhouette on
August 10, 2017

Add Fun to Your (Work) Space with a Hanging Wall Banner

I am in the process of revamping my craft “room” so that it becomes a space of inspiration and creative purpose. Being six feet away from the kitchen sink, the dishwasher, and hearing the laundry ding from the wall behind me is very distracting. Squirrel!

So, I made this little wall hanging banner with an inspirational quote in hopes that it will do the trick and motivate me to keep going with my #crazycraftlady ideas and projects. Playing around with felt has been on my craft to-do so I was so excited to learn that my Silhouette CAMEO can cut felt! Here are three things to know/do when cutting felt with your Silhouette cutting machine:

  1. Use high-quality felt (I used one made by Camelot Fabrics) for the top felt piece that will have the inspirational quote
  2. Add Silhouette’s Fusible Fabric Stabilizer to the back of the high-quality felt
  3. Use a separate blade dedicated to fabric cutting. Silhouette’s Fabric Blade is perfect as it’s colored differently so you can easily remember to swap in/out!

Use your favorite quote for this project (tutorial below) and spruce up your work space with some positivity and encouragement!

Where to buy unique craft supplies: Silhouette Fusible Fabric Stabilizer | Tombow Multi Liquid Glue

 

By /
In DIY, Silhouette on
August 6, 2017

Obligatory First Day of School “Chalkboard” Sign

 

School is just around the corner and I’ve got another great craft project to excite your kiddos about starting or returning to school…you know, the obligatory “first day of school” sign! This project created for Silhouette’s Blog is especially unique because it features Silhouette’s chalkboard vinyl. There are several GOOD reasons I chose this method versus using a standard chalkboard. Let’s break it down:

  1. Unless you’re an expert chalkboard artist, you will be spending a lot of time fitting your words, perfecting the look, erasing, starting lines over, etc.
  2. You can use chalk markers (I highly recommend Marvy Uchida Chalk Markers) for crisp white or colored lettering that makes your board look professional!
  3. The chalkboard vinyl is reusable so you can use the same chalkboard for many years to come and for multiple kids!

So you wanna make one now right? Click here to read the tutorial!

By /
In DIY, Freebies, Graphic Design, Home Decor on
August 2, 2017

National Coloring Day (FREEBIE!)

Hello August!! Has your summer flown by too?

Luckily, I have a special FREEBIE for you that will help you slow down and enjoy the present. In honor of National Coloring Day today, I created a 8in x 10in coloring sheet that can also serve as pretty home decor. Or frame this print and give it to a friend for a special occasion or just because…who doesn’t like thoughtful and homemade gifts?!

Grab your colored pencils, a nice cup of coffee, and get lost in the art of coloring!

Click here to download today’s FREEBIE!

By /
In DIY on
July 31, 2017

Look at the Stars, Look How They Shine for You (and Your Kids)!

#sorrynotsorry for the cheesy blog post title..I just can’t help myself sometimes! A good laugh is good for the soul…we are way too busy and stressed these days! I’m definitely guilty of that. I just read online that in the 1950s, people used to laugh an average of 18 minutes a day. Today, that has dwindled to 4-6 minutes a day. Yikes! So take a moment today and do something that makes you laugh!

Okay, I totally digressed…so back to today’s post! Stars! Raise your hands if you used to stare so long into the night sky until your neck hurts? Raise your hands higher if you had glow-in-the-dark stickers on your bedroom walls and ceiling! How about combining the two and making something super awesome?! Swing by Silhouette’s blog to read my tutorial on making Glow-in-the-Dark Constellation Cards. Not only is this an incredibly simple craft you can make with your kiddos, this is a great activity to spend the summer nights together as a family!

By /
In Birthday, DIY, Parties on
July 27, 2017

TBT – Here’s to 4.5 Years!

This week, my firstborn turns 4.5 years old. What the what??

So since I’m in disbelief, I’m going to act like a moody preschooler, pound my fists while declaring he’s still 4, and take a walk down memory lane. For the first four years, I have been lucky to have picked the themes for his birthday parties and he’s totally been cool with it. Never once asked to change it. So lucky, right?

For his 4th birthday party, we did a dinosaur-themed party because he really liked the Disney movie The Good Dinosaur. While I did not use the characters from the show except for a figurine/toy as table decor, I turned to the Silhouette Design Store (SDS) for dinosaur-related shapes and designs. Personally, I prefer to do party themes that aren’t so specific like TV shows, characters, etc because it’s easier on my end since I’m the one who’s crafting it all. I stick with general shapes and repeat the party colors wherever I can.

Do you have a dinosaur-themed birthday party coming up? Take a look below and be inspired!

Party Banner
The dinosaur body parts on this awesome banner is Design ID#85872 from the Silhouette Design Store. I opted to make my own birthday messaging in the middle to personalize the event even more. To create the word banner, simply cut out letters with an offset backing in a different color. Between each layer, I placed dimensional foam adhesives so that each layer would “pop.”

 

Themed Cupcake Topper
Did you know you don’t always need a SDS design to make your Silhouette creations? Use your imagination! This particular cupcake topper is super easy to make and great for those leftover paper scraps! With the Text tool, I typed out “4” and “ROAR” and sent it to Silhouette to cut. Use different colored and/or textured paper to make your project colorful and eye-catching. Again, I used dimensional foam adhesive behind the letters to give the cupcake topper a 3D look.

 

Favor Tags
As I mentioned before in a previous post, the Silhouette CAMEO cutting machine is your party decor workhorse! Did you know it can also serve as a basic graphic design program. These favor tags were created to work like a Print and Cut design…simply create within Silhouette Studio and then send it to Silhouette to cut out.

 

Favors with Tags
I was inspired by Pinterest to make these party favors. Duh, where else? Don’t the favor tags complete the look of the favors by providing some visual interest? Side note: If you are going to do these dinosaur-topped baby jar favors, have major self-control when assembling the favors. The large M&M bag was so hard to resist! I may have had a couple…handfuls.

 

Goodie Bags
I spiffed up chevron goodie bags purchased at my local Michaels by adding some dinosaur diecuts with the all-time favorite…googly eyes! I love SDS designs that come in a set, like this one (Design ID#23556). Four dino shapes for the price of one! Score!

I even used these dinosaur shapes elsewhere at the party, such as simple decor on the wired dessert stand in the picture below. My favorite use of these dinosaur diecut shapes was for the dinosaur egg hunt activity I set up for a group of energetic preschoolers. I had my Silhouette CAMEO cut out one dinosaur shape per 8.5in x 11in colored cardstock and glued a bamboo skewer to the back. Then at the party, I had hubby and few other parents staked them into the grass at various areas at the park. Meanwhile, I passed out to each kiddo a foam dinosaur hat (a HUGE hit!), a cheap plastic spatula, and a goodie bag filled with about 5-7 dinosaur-filled eggs.  The objective of the game was to deliver one dino egg via spatula to their mommy/daddy dino’s home, by color. So for example, if they had a green egg, they had to find the green dinosaur shape staked somewhere in the park. It was hilarious to see how some kiddos took it very seriously to safely deliver the eggs across the grassy park. And then there’s my Type A kid who was trying to instruct his friends that the magenta egg belongs to the pink dinosaur not the purple dinosaur. 🙄

 

This party was outdoors so I kept the party decorations minimal and focused my crafting/decorating attention on the favors and tablescapes. I hope these party ideas are helpful and inspire you to create and personalize your upcoming special event!

By /
In DIY, Silhouette on
July 25, 2017

Back to School Count Down

 

Alright mama bears, fess up…who’s counting down the days until school starts??

If you raised your hand, it’s your lucky day! I have teamed up with my friend Rachel Place of Sweet Elsie and we put our crafty and creative juices together and created a fun and simple project for you and your kiddos – a back to school count down!

This exclusive Silhouette design features a crayon box with numbered crayons that can be removed each day until the first day of school. You guys, you can even personalize it with your child’s grade! Make one for each kiddo…get everyone excited and playing along in the count down! 🙂

Before we start with the simple tutorial, let’s talk about Rachel…who is she?! She is a Silhouette Artist whom I met at Silhouette Summit earlier this year. Together, we braved the waves out to our submarine excursion but I’m pretty sure she handled it a lot better than I did! Here are some more fun facts about this graphic design extraordinaire!

Want to see more of Rachel’s designs? Check her out on Instagram at @rachel.place and @sweet_elsie

 

Oh Crate & Barrel….me and you both girl! 🙂 I could dream all day about re-decorating my home to look like it was straight out of a C&B catalog! BUT let’s get back to reality and how about we DO something instead?! Here’s how to make your own back to school countdown! 🙂

Supplies needed:

 

 

 

By /
In DIY, Freebies, Parties on
July 20, 2017

Ice Cream Bingo (FREEBIE!)

The celebration continues! As you can see, I am taking this ice cream celebration seriously AND making it a whole family affair. Well…you should too. 🙂

Now that I’ve inspired you to craft the perfect shirt and showed you how to spiff up your ice cream wooden spoons, it’s time to play a game of Ice Cream Bingo while devouring a bowl of ice cream (duh!!). Click here to download the super cute FREE printable. Instructions are on the bottom of the first page. There are eight unique bingo cards so the maximum number of players is eight. If you have more than eight players, team up so that everyone can join in on the fun! Use coins or scrap paper as your bingo markers and have some fun! Maybe the winner gets an extra scoop or TWO of ice cream??

 

By /
In DIY, Parties, Silhouette on
July 18, 2017

DIY Stamped Dessert Spoons

Is it me or is there something magical about wooden dessert spoons? All I can think of are those little individual ice cream cups with wooden spoons that we got back in the day…I can’t even remember if it was elementary school or later. I just remember, as a kid, those ice cream cups were heavenly.

So since I am making National Ice Cream Day a week-long celebration, let’s fancify our ice cream eating experience with DIY stamped dessert spoons! This project features the use of a different Silhouette machine…a custom stamp maker called The Mint.

Supplies needed:

  • Silhouette Mint
  • Lori Whitlock’s Grateful Font (of course you are more than welcome to use any other fonts!)
  • 60mm x 30mm Mint Stamp Kit (use promo code 10OFF)
  • Mint Ink in black (or whatever color you want)
  • Wooden dessert spoons (got mine on Amazon)

Step One: Create design in Mint Studio

  1. In the Stamp Settings window, select stamp size 60mm x 30mm.
  2. With Text tool selected, I typed up various fun phrases for my wooden spoons, such as “Treat Yo Self” and “Nom nom nom” and “Wanna Spoon?” (You know me, I love my puns)
  3. Next, I resized them to all fit the 60mm x 30mm stamp space while making sure each phrase would fit nicely within the space on the spoon’s handle. Now your stamp is ready to “print” via Mint!

Step Two: Send to Mint

  1. Send your stamp to Mint and follow prompts in the program.
  2. Once printed, pull the cardboard piece out and fold along the perforated line.
  3. Remove the black square stamp from the cardboard casing as well as the plastic layer on top.
  4. Then, remove the lid of your stamp base, remove the protective layer, and apply your stamp to the stamp base.
  5. Apply the black (or whatever color you picked) ink and set it aside for about 10 mins to let the ink soak in.


Step Three: Stamp Spoons

  1. Stamp off the excess ink on a scrap piece of paper. TIP: As long as you let the ink penetrate for 10 minutes, don’t hesitate to keep practice stamping until you are getting a clean quality of your stamp image.
  2. Because my wooden spoons had some curvature, I let the spoon part hang off the edge of the table and laid the handle part flat on the table. Then, I stamped onto the handle part with even pressure. There are different ways to stamp plus your spoons may be made slightly different from mine so have fun and play around to see what works best for you!

By /